2009-11-08

Regenerative Braking Video


In this video a Toyota representative explains how the regenerative braking system in a modern Camry sedan works. The brake system uses both electric and mechanical parts. They say that 80% of the braking is done by the recoverable electric system, with the last 20% provided by a standard mechanical pressure based system. Although when he says that the regenerative braking works by converting heat in the brakes to stored energy, I am almost certain he is oversimplifying. Normally regenerative braking systems work by using the rotational kinetic energy stored in the drivetrain to run a generator, which then charges the battery.



2009-11-07

Regenerative Braking


Motion requires energy. To overcome inertia and add speed to a body, energy must be added. The energy a body has by virtue of its motion is called kinetic energy. The formula giving the amount of kinetic energy K that a body of mass m will have at a speed v is K = ½mv2. Note the occurrence of the square of the speed. That means doubling the speed does not double the energy needed but rather quadruples it. Now energy cannot be created or destroyed. So to get your car up to speed the required kinetic energy has to come from somewhere. In a standard internal combustion engine driven vehicle, this energy comes from the chemical energy that was stored in the fuel, in the gasoline or diesel.

When you want to slow down or stop the kinetic energy will be lower at the new lower speed. Since it cannot just be destroyed, this energy must go somewhere. In a normal vehicle it is converted to frictional heat in the brakes. This heat then escapes and the energy is lost forever. Every time you slow down, you are throwing away all of the chemical energy that came from the fuel. Your brakes slow you down and in the process turn gasoline into heat.

What if it were possible capture the kinetic energy that is lost as you slow down and store it for reuse later? Obviously it cannot be converted back into chemical energy in the fuel. Internal combustion engines and standard brakes have no way of capturing the kinetic energy and it must be lost as heat. This is the reason that the Golden Rule of Hypermiling is "Maintain Momentum". Every time you slow down and speed up again, you have turned some fuel into heat.

Electric engines, such as used in hybrid vehicles or NEVs can capture some energy while slowing down. This is because electric engines run off of batteries, which can both provide and store electric energy. Compare that to liquid fuel, which can put energy out but it is impossible to pump energy into. Also an electric engine run in reverse is in fact an electric generator. Depending on which direction you run it, an electric engine can draw stored energy out of a battery to provide work or it can accept outside work, generate electricity and store it in the battery. Regenerative braking basically switches the electric engine to run in reverse, in generator mode. It makes the spinning wheels and drivetrain do work on it. As the drivetrain torques against the electric engine, it slows down, thus slowing your vehicle down. The drivetrain torquing the engine allows it to generate electricity, which is then stored in the battery.

Although regenerative braking is not capable of capturing all of the kinetic energy due to inevitable losses, any percentage it does recover is available to accelerate you back up to speed without needing to put in fresh energy. Unlike normal internal combustion engines and standard braking systems, not all of your motion energy is lost when you slow. And that means you save on energy.

2009-11-06

Freight Bikes


During the American golden age that followed World War II, plentiful cheap fuel and the spanking new interstate highway network ushered us into the rise of the personal automobile and “18-wheeler” trucks. As a result, every other method of transport was at least partly neglected. In that world, this made economic sense. But in a world of consistently high fuel prices it is not good to have all your eggs in one overpriced basket.

In a world of high gas prices it makes more sense to diversify transport. Each particular function served by transport can be more efficiently served by a specialized mode. For example, we have looked before at Neighbourhood Electric Vehicles and considered the use of a motorcycle instead of a much heavier and fuel hungrier vehicle. In the long distance point to point hauling of bulk freight specialized trains can be the most fuel efficient solution. And so on.

Freight bikes are bicycles designed to carry a light cargo over local distances. They are almost always tricycles, necessary for stability while loading, parking and unloading. Normally a large box or wire frame basket is attached to the front or rear. Special relatively heavy duty gearing is installed. The frame is also heavier and sturdier.

Although they seem symbolic of underdevelopment to many people, freight bikes are actually a very good solution in situations of fuel unavailability or high fuel price. Obviously their range and cargo load are limited by the human power source. It is also very difficult to operate them in hilly terrain. But for local delivery over flat ground they are perfect. I suspect that as the price of gasoline rises relative to labor we will see more and more of these on the streets of the United States. And if that helps us save on gas, it is a good thing.

2009-11-05

Wheel Covers Can Reduce Air Resistance


Racing bicycles have flat disc wheels instead of the open spoked type found in everyday bicycles. The reason is because flat disks have less air resistance. And as speed increases, air resistance quickly increases until it becomes the limiting factor.

The same principle applies to your car. Smooth wheel covers will help streamline the airflow around the wheel well area, lowering the air resistance. Less air resistance means you will get better fuel economy. The next video demonstrates a simple homemade wheel cover. It doesn't have to be fancy. From the point of aerodynamics it only has to be a flat surface. You can even use pie plates!



You can also try to earn a little advertising money with your wheel covers. There are companies like CapAds which sell smooth wheel covers that carry advertising. The wheel cover is designed to stay still and not rotate so the ad can be clearly seen. From the point of view of aerodynamics the important point is that the flat advertising space acts to reduce air resistance! The following video shows a car equipped with advertising wheel covers.



There is a saying that there are no such things as magic silver bullets but there are silver BBs. The idea is that in the real world you can't just push a button and solve big problems like reducing your fuel consumption. But often there are a lot of little things you can do that add up to a solution. The silver BB solution requires work because each individual BB requires a little effort to implement. Just as the benefit of the BBs adds up to a solution, the work required adds up too and can be in total quite an investment. But at the end you have the problem solved. So if saving on gas is a problem for you, consider adding aerodynamic wheel covers to your list of BBs.

2009-11-04

Tractor-Trailer Fuel Economy


The trucking industry has paid a lot of attention to fuel economy. For them, their bread and butter depends on it. In fact, for them the word "performance" doesn't bring to mind high speeds or fast accelerations but rather good fuel economy per ton of cargo moved. Therefore looking at what they do to save on gas lets you take advantage of decades of tried and true tips and strategies. Caterpillar has published a report on Understanding Tractor-Trailer Performance which lays out the best ways they know to save gas with a big rig.

Their list of most significant factors affecting fuel economy includes these:

  • Driver

  • Route Selection

  • Vehicle Speed

  • Frontal Area of vehicle

  • Aerodynamics of vehicle

  • Hill Grade

  • Climate

  • Idle Time

  • Tires

  • Transmission


Caterpillar is very clear that the most important factor is the driver. The driver has direct control over many things including speed, accleration rate, usage of the brakes, shifting technique and time spent stopped with the engine idling. According to the report, fleets of identical trucks reveal fuel efficiency differences of 25% between the best and worst drivers. And even a bad trucker will probably drive more fuel efficiently than the average car driver. Truckers naturally develop a hypermiling culture amongst themselves due to the economic pressures in their industry.

The second factor they discuss is route selection. Caterpillar notes that driving in heavy traffic on congested roads notably increases fuel consumption. They find that a route of which 25% of the distance is congested leads to a 15% increase in fuel consumption. A route of which 15% is congested increases fuel consumption 8%. Roughly extrapolating to other percentages of congestion will allow you to estimate the mileage penalty of congested routes. In turn this lets you trade off the fuel penalties of distance and congestion. Choosing a longer route that avoids traffic could actually use less gas.

So Caterpillar is telling us that the most important factors determining your fuel usage and fuel economy are how you drive and where you drive. Read over the report if you have a few spare minutes. If it helps you save on gas, it will be time well spent!

2009-11-03

The Aptera Guided Tour


The Aptera is a highly aerodynamic electric powered vehicle made from lightweight composites. It is designed from the ground up to be a gas sipper. The Aptera is built like an aircraft rather than a normal car or truck. That includes careful attention to safety. The Aptera has crumple zones, airbags and hardening against side impacts. The Aptera is a tricycle wheeled vehicle. That was done to reduce the contact area of the wheels with the ground, which reduces rolling resistance. The Aptera also boasts solar powered air conditioning. That is a little less energy that you would otherwise have to load into the batteries. The use of carbon fiber composites lets the Aptera get away with about half the weight of a typical car. Composites also permit the construction of the sleek aerodynamic body. The same body built of steel would be much more expensive. The composites don't sacrifice on strength: they are 10 times stronger than typical car steel.



The video gives you a guided tour of an Aptera. Take the tour and then plug in an Aptera and save on gas!

2009-11-02

A Pantry Can Save on Gas


Remember those not so far gone years when everybody kept a well stocked pantry? Or a shelf or two of preserves in the basement? Keeping a stock of food can help you save on gas by reducing the miles you drive. If you find yourself going to the store every day to pick up a couple of things you will rack up the odometer pretty fast, burning gas while you do it. Consider instead going shopping less frequently and buying more. Make one big grocery run every week, or even every couple of weeks.

Maintaining a store of food and other consumibles in your house has gone out of fashion in today's just in time world. But it brings more benefits than just reducing gas usage. You will save on time too. All of those "convenience" trips add up to more time than one big monthly run. And you will always have an emergency supply. For those unpredictable times when something happens, like a big storm or the power system goes down you will be ready.

2009-11-01

Tonneau Covers Help Pickups Save Gas



For about $600 you can install a hard fiberglass tonneau cover on your pickup. Tonneau covers improve pickup aerodynamics so you will see a drop in your fuel consumption. Especially if you frequently drive at highway speeds. This is because at higher speeds aerodynamic drag becomes more and more important. If you are used to taking your pickup with an open bed up to speed on the highway, you could easily find yourself saving back the $600 investment in less than a couple of years.





The video shows the steps involved in the installation of a hard tonneau cover. As you can see it is basically simple. Clean the cover off, apply alcohol to the rails and corners to prepare it for some protective waterproofing tape and then apply the tape. The tape is basically a seal. Then it is a matter of tightening down some C-clamps, brackets and bolts. Done! Something simple and cheap to do can make a noticeable difference in your pickup's gas mileage. So go ahead, install a tonneau cover and save on gas!

2009-10-31

Keeping an Eye on Traffic


The US Department of Transportation's Federal Highway Administration maintains a traffic monitoring program. Based on a network of some 4000 sensors on roads, streets and highways across the nation they can esimate the total number of vehicle miles driven in a given hour, day or month. Vehicle miles is a way of measuring a combination of how many vehicles were moving and how far they moved. One vehicle mile could mean a single car drove a mile or that 4 cars each covered a quarter mile. The graph to the side shows the traffic volume for the entire US averaged over a 12 month window. This is interesting, because the amount of fuel used by the nation principally depends on two things. One is how many vehicle miles we are driving and the second is how much gas it takes on average to move a vehicle a mile. This graph shows that vehicle miles traveled goes in one direction - up. Until the summer of 2008 that is. You can see how the $4.00 gasoline we had at that time caused an unprecedented crash in the amount of driving.

2009-10-30

OIl Producing Countries in Decline


Gas comes from oil, and it looks like very soon the global production of oil will not be able to satisfy the demand for it. This simple idea is known as Peak Oil. The International Energy Agency (IEA) has warned us that the day of supply less than demand is coming. Here is data taken from the IEA Oil Market Report of September 2009 showing the declining output in some oil producing countries.

Oil Producing Countries With Declining Output
CountryYear (Million Barrels per Day)
199820032008
Nigeria2.112.151.95
Venezuela3.122.362.35
United States8.377.837.52
Mexico3.503.793.16
United Kingdom2.842.281.56
Norway3.143.262.46
Australia0.710.670.56
Indonesia1.551.711.03
Argentina0.900.830.75
Colombia0.820.550.59
Oman0.900.820.75
Yemen0.400.450.31
Syria0.570.530.39
Gabon0.350.250.21
Egypt0.870.710.65
Totals30.1528.1924.23


Lower production of oil means less gasoline, which in turn means much higher gasoline prices. As each new country sees its production decline it will necessarily go looking for imports. The more importers there are in the market, the higher the oil price. These numbers are good motivation for starting to save on gas now!